Prusa i3 screw down vibration damper feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a couple of vibration dampening feet printed in flex material that hold the m10 rods on the prusa i3 design to…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a couple of vibration dampening feet printed in flex material that hold the m10 rods on the prusa i3 design to keep the printer off the ground and dampen vibrations. They are designed to be screwed down into the surface below the printer.
I made these because I got tired of always carefully placing my dampers whenever I had to move the printer. With these the printer is always placed in the same perfect position in my enclosure.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
0.2
Infill:
15% fast honeycomb
Notes:
Printed in generic TPU/flex material. I follow Makers Muse YouTube tutorial for successful flex prints on the Prusa i3 mk2.
I made sure the center of the honeycomb infill was in the center of the model to create an even stiffness in both the x and y axis, see picture.
Category: 3D Printer Parts