PET-Kanna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified this soda bottle watering can adapter to make the stream a bit softer on the soil in my smaller pots. For…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 834
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified this soda bottle watering can adapter to make the stream a bit softer on the soil in my smaller pots. For the small streams to not just join again after the nozzle, it is essential that the holes are small. If your printer/filament setup fuses the holes together, drill them out with a 1-1,5mm drill bit. This is not for pouring large amounts of water since that will take forever!
In the spirit of the original thing, I call it PET-Kanna in reference to the Swedish word vattenkanna :)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
0.2
Infill:
20%
Notes:
Just as the original, this thing needs to be printed upside down.
I printed mine in semi translucent blue PETG
Category: Outdoor & Garden