PINDA protector for Original Prusa i3 MK2S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a PINDA protector cap that fits the MK2S extruder mount to prevent badly warped parts to get stuck on it while…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a PINDA protector cap that fits the MK2S extruder mount to prevent badly warped parts to get stuck on it while printing.
Edit 28/10 2017: Since some people had problems with fitting the original model with the m8 threads I made one with enlarged threads. I have not printed that version myself so feedback is welcome. I would not recommend anyone to use a loose-fitting protector since if it falls off it will probably do more harm than good.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
0.1
Infill:
100%
Notes:
Print in ABS or other high-temp material since it's close to the hot end.
Post-Printing
Clean the threads
I ran a M8 thread tap through the protector to clean up the threads but you could probably use a M8 bolt or carefully force it on the PINDA probe(at your own risk).
Category: 3D Printer Accessories