Shockbottle Hundo Case Gauge Filler remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of VP-MFG's orginal Hundo Case Gauge Filler design to make it easier to print with zero supports needed.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Many thanks to VP-MFG for providing the original design files. My friends and I were having issues printing this with supports, so I modified the files to have it print in two parts. Material selection and layer height are up to your preference; here's what worked for me:
- Printed on Prusa MK3S+ w/ Satin spring sheet, 0.4mm Revo nozzle
- Polymaker ASA (not necessary, PLA or PETG should work fine)
- 0.3 mm layer height (PrusaSlicer default 0.3 Draft preset used)
- 10% infill
I used ASA because I didn't want to change filament. It should work fine with PLA or PETG. I used 0.3mm layer heights to print it as quickly as possible. Adjust to the level of detail you want and speed at which you want to print.
BOM:
4x M3 x 10 FHS
4x M3 x 4mm OD x 5mm L Heat Set Inserts (What I used: https://www.amazon.com/gp/product/B09MCWTBCC)