1 / 4
Geocaching biltema tool for NEXT 10 FGN, tip diameter 8,4mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool with PET holder and magnet
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I made this tool for a NEXT 10 FGN rod. The diameter of the in this case used second segment is 8,4mm so I made the hole with 9mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will fit for other pole fishing rods with the same diameter.
The magnet is a small one with M4 thread.
Printed with 80% infill grid.