Stargate Keyholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the bigger cousin of https://www.thingiverse.com/thing:2459582 Because I have more and bigger keys now :)
- Ocena
- 4 / 5
- Polubienia
- 45
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 1789
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the bigger cousin of https://www.thingiverse.com/thing:2459582
Because I have more and bigger keys now :)
Print instructions
Category: Keychains Print Settings
Printer Brand: Prusa
Printer: i3 MK2.5
Rafts: Yes
Supports: No
Resolution: 0.1
Infill: 20
Filament: Prusa, Prima Select PLA, PET Silver, Transparent Yellow
Notes:
The chevrons were printed in transparent yellow PET and are press fit. You should not need glue.
I used brims on the smaller parts, particularly the spacers so that they don't fall over or slip off the bed.
Post-Printing
Assembly
I used M4 hardware to put it together. The machine screws are M4x30, you could use shorter ones, but remember to scale the spacers accordingly before printing.
Locking nuts are recommended!
How I Designed This
Designed in Fusion 360, the artwork was imported from Inkscape.