Tesla Model Y Sunglasses Holder (2022, 2023)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds sunglasses above the visor in a Model Y
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 419
- Wydruki
- 2
- Wyświetlenia
- 2174
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
With these sunglass holders, you can store your glasses directly above your head and the visor does not get in the way. Just slide it in above the rear-view mirror and the push it to the driver or passenger side, or wherever you want it.
Tested on Model Y 2022 and 2023. On the 2022, it is a good fit. On the 2023, it is a very snug fit but works.
Print with a ≥ 70% infill.
First prints were on a Lulzbot in Co-Polymer and fit my glasses tight. Second print was on a Qidi X Smart-3 and my glasses were loose so I used a heat gun to custom fit by heating the holder sliding my glasses in to secure a fit, and then letting them cool. Use this method to fit different size glasses - or modify the file.