Dividers Elegoo cardboard spool drawers with dividers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawers for empty Elegoo cardboard spool, with single or double divider.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 1178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
BEFORE PRINTING (after saving this remix :) ) not every spool has the holes aligned so check it and then do it. You'll be ok drilling a hole but I hate preprocessing or postprocessing so you're warned :)
Added dividers to the original model. I found the peg and cap to be better printed with Arachne as wall generation mode. If you're having trouble with the cap scale it a bit (I did 102%).
Upload your makes! :)
The ones you see in the photos are printed with a 0.6mm nozzle with 0.2 layer height and 0.6 layer width, 15% infill.
If you want to contribute feel free to remix! In the future I'd like to make this parametric (haven't done anything parametric yet and this seems challenging).
Check out the original model of this remix for half height and bin inserts if you're more into that!