Upside-down stand for Cryostream 800
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for the coldhead of an Oxford Cryosystems Cryostream 800 cryostat. I'm guessing the head was designed to be…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A stand for the coldhead of an Oxford Cryosystems Cryostream 800 cryostat. I'm guessing the head was designed to be serviced upside-down (edit: confirmed by manufacturer, they have a very similar stand). I used it several times now and it works very well. A long ziptie can theoretically be added for extra stability, but I don't think it will be necessary. The long central cuts are meant to screw the whole thing to a 2x4 (or similar) if I ever need to put it in a vise.
The main plug remains accessible for soldering work.
Note: I use a 5mm scrap piece of plexi here, the screws are countered with hexnuts! Do not use self-tapping screws!
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Fillamentum PLA ivory white
Category: Tools