Gridfinity USB Key Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assort your usb keys in all different ways.
- Ocena
- 4,833 / 5
- Polubienia
- 68
- Pobrania
- 326
- Wydruki
- 6
- Wyświetlenia
- 1624
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A gridfinity bin series with insert that lets you store usb keys in arbitrary ways/patterns.
The most I've managed to make fit in a 1x1 is 6, so if you fit more make sure to add a picture!
The fit is extremely snug, you should force the parts together and they will never come apart. you can print it as one item also but the colour difference is nice. I've included a model of both together if you just want to print it in one piece.
I've added a bunch of extra sizes to the models as well. These use my 21mm based gridfinity compatible design. This style of foot on the bins on a nominal 42mm grid is much more versatile.
#### Updates
v1.0.0:
- Initial Publish
v1.1.1:
- Added Type2 with slight taper for easier insert.
- Updated the module to fix the magnet depth issue noted.
v2:
- Base file is now parametric
- Added 1x1, 1x2, 1x3, 2x2 versions
- Utilised my 21mm based grid feet for more versatility
- They utilise a 1deg taper rather than a top edge chamfer to aid insertability.