Customizable Cyclone Separator (RMX)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My remix of mgx's variant of the cyclone dust scrubber, adding the possibility to define different sizes for the inlet…
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 411
- Wydruki
- 1
- Wyświetlenia
- 2176
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
My remix of mgx's variant of the cyclone dust scrubber, adding the possibility to define different sizes for the inlet and outlet. I also added a thread for the standard european PET water bottles (thread from Necks & Caps Library by Xavan, thing:1654620).
The provided stl was made with a 32mm OD vacuum hose connector and 19mm ID inlet towards the dust shoe.
Just add swiss spring water bottle :-)
EDIT: After a few weeks of testing with aluminum, it works fine so far. The bottle I'm using compresses a bit from the vacuum but still does the job.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
No
Supports:
No
0.2
Infill:
20
Notes:
Printed at 80mm/sec.
Category: Parts