1 / 1
FGC-6: Sound Amplifier for 14mm CCW for airsoft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sound Amplifier for airsoft
- Ocena
- 4,333 / 5
- Polubienia
- 81
- Pobrania
- 594
- Wydruki
- 1
- Wyświetlenia
- 2023
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (141)Powiązane
this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.
there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel. this might help to prevent the threads from breaking off.
and as you can see are there 3 models out there what will give the best sound effect? I leave that up to you to explore/
print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.