HyperX Cloud Alpha (Wireless) "hinge" replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the plastic shell over the adjustment point on the Cloud Alpha headset. Must replace front and back.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 481
- Wydruki
- 1
- Wyświetlenia
- 2201
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model will work for both left and right sides of the headset. You have to replace both the front and the back of the hinge for each side that you want to replace as it will not mate with the existing shell pieces. Also, for the back piece you'll have to cut the existing piece to free the cord, I just used my flush cutters that came with my printer for that.
Use m3x16 bolts with m3 nuts, specifically I used some with a tapered head on them.
This is the kit I got the screws from.
I may adjust the model a bit more, I'd like just a bit more grip on the headband and on the yoke.