Raspberry pi case for Elegoo Neptune 3 Pro (klipper conversion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case that slides into the side grooves of Neptune 3 Pro
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 225
- Wydruki
- 0
- Wyświetlenia
- 1834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted to mount raspberry pi outside the printer, at least until I design a board with IO openings (board itself could be housed inside but wifi adapter has to be outside and it would be nice to have access to LAN/USB ports from the outside too). Added V-slot grooves to attach the case without tools or fasteners. I choose maciejb version because it had exposed GPIO for power (I don't have any micro-usb cables left) and a slot for camera ribbon cable.
micro-USB, audio and HDMI ports are facing down so if you need to use those, this is not a suitable case.