Frisbee Wire Reel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple reel for storage and deployment of wire, string, cable, or any other long thin and flexible objects.…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 3
- Wyświetlenia
- 465
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Just a simple reel for storage and deployment of wire, string, cable, or any other long thin and flexible objects. Inspired by a mention of a similar frisbee reel for deploying ground plane wires easily. Capacity will depend on diameter of the string, but i was easily able to get ~30m of 4mm paracord on it with some space to spare.
Print 2x the [MASTER Side.stl] and clip together. No supports required- all chamfers are 45deg to the build plate.
I have printed this successfully at 0.2mm layer height in PETG and it took quite a bit of force to clip together- and some breakage- but it is firmly together.
Updated/Current design has some slight modifications to the tabs/pockets which make it much easier to clip together. This version has been printed successfully, this time in 0.3mm layer height.
Category: Electronics