1 / 2
EJ251 Fender Cold Air Intake (Factory Air box) V2.7 — zdjęcie 1
1 / 2

EJ251 Fender Cold Air Intake (Factory Air box) V2.7

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EJ251 Fender Cold Air Intake (Factory Air box) V2.7

Ocena
0 / 5
Polubienia
11
Pobrania
66
Wydruki
0
Wyświetlenia
955
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
GNU Lesser General Public License

Fender Pick Up Cold Air Intake for 2002 Subaru Impreza EJ251.

------------------------------------------------------------------------------------------------

Pros:

 - Cleaner Engine Bay

 - Theoretically colder air (factory pickup is next to radiator)

 - Larger Diameter, less skin friction drag

 - Looks cool

 - Tubing may act as resonator, increasing noise above 3,500 rpm

 

Cons:

 - Tubing may act as resonator, increasing noise above 3,500 rpm

------------------------------------------------------------------------------------------------

Required Parts

 - 3.5" OD Tube (16 gauge to have smooth transitions to the plastic parts). Link

 - 3.5" ID Silcone Hose Coupler. Link

 - 4 x >3.5" Duct Clamps. Link

 - Epoxy / JB-Weld

 - {Optional} Wire Mesh (prevent maple leaves and larger debris from reaching and blocking air filter). Link

------------------------------------------------------------------------------------------------

Printing

 - “Intake” part should be printed out of nylon or something semi-flexible, everything else has worked good printing it out of asa.

-------------------------------------------------------------------------------------------------

Instructions

 - Glue Pipe to Inlet

 - Fenagle the velocity pipe into the quarter panel, annoying, but do able (faster than taking the panel off)

 - Put silcon adapter on velocity pipe to prevent it from falling back down.

 - Cut metal pipe to length 

 - Install inlet with metal pipe and screw down silicon adapter

 - Apply glue to bracket print and use duct clamps to secure it to the pipe.

------------------------------------------------------------------------------------------------

*"Sucks More" is intended as humor and not a claim of increased performance.

Tagi