Honeycomb Windmill - Self adjusting hexagon turbine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beautiful windmill with hexagon honeycomb propellers. Put 3 you like on the axle. Change direction for cool effects.
- Ocena
- 5 / 5
- Polubienia
- 169
- Pobrania
- 580
- Wydruki
- 9
- Wyświetlenia
- 4636
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Honeycomb Windmill - Self adjusting hexagon turbine
- Beautiful Windmill with a unique honeycomb Propeller Design
- Self adjusting to wind direction through the Tail Blade
- 100% printed, no Screws or tools needed
- You can add 3 Propellers on one Axle with 2 distances
- Use different propeller sizes and directions (You get nice effects if you choose different directions)
- Rods are stack able to your needed height
Printing:
Files has the recommend print orientation.
For Propeller set wall generation to Arachne mode and set walls to 0,7mm
The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.
Is tested with PETG & PLA 👍
Assembly:
Thanks to all followers and don't forget the virtual handshake 👍 ….Happy Printing
You can combine propeller blades with Toroidal Windmill: https://www.printables.com/model/807172
Checkout this Clamp for windmill, as well🧐 https://makerworld.com/models/255324