Rovyvon E8 Tail clip magnet attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tail clip for the Rovyvon E8 Angel Eyes to hold a magnet. I used an "11.4mm x 11,4mm x 4.7mm" magnet in this project.…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tail clip for the Rovyvon E8 Angel Eyes to hold a magnet. I used an "11.4mm x 11,4mm x 4.7mm" magnet in this project.
The measurements were made really tight for a better hold, so you will have to push the magnet in the model while still hot. If you want to use a smaller magnet, use hot glue or design an adapter part.
The tail clip will fit just right in the flashlight. There is a pass-through hole in the widest part for you to put a pin to hold in place. The pin can be made of a cotton swab or you can print it yourself.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Category: Tool Holders & Boxes