Connectors for Lakeshore "Connective Furniture"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed four of these connectors to attach my custom section into a toddler wall.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I built a custom section for a toddler wall at a child care center. I needed four of these connectors to attach my section into the wall.
The first photo above shows one of my connectors test-fit to an original wall section. The last photo shows the toddler wall with my section on the right.
Print "big side" down as shown in the second photo. No supports needed. The STL contains a sacrificial layer in the mounting holes. Just punch your screw right through it.
The .bgcode prints a pair of connectors in about a half hour on an MK4.
Print Settings
Printer Brand: Prusa
Printer: i3 MK4
Rafts: No
Supports: No
Resolution: 0.15 mm
Infill: 15%
Filament: amazon basics PETG Black