PrintDry 2.0 plug with hole for PTFE tube (reverse Bowden)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple remix with a 4mm hole to hold a standard PTFE tube
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 1276
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I like Kyle's plugs for the feeding holes in the PrintDry 2.0 Pro dryer. I was trying to find the best way to print TPU directly from the dry box and ended up with running a PTFE tube to my Mk3S. I found a couple of adaptors for PC4 fittings but that felt overkill to me. So I simply remixed Kyle's plug to add a hole for the PTFE tube. It can be used for a proper reverse Bowden setup or simply with a short tube to provide a lower friction filament path if the PrintDry is located above the printer, e.g., on top of an enclosure.
I suggest printing it with TPU or TPE. I used Monoprice TPE I had on hand. Just slide the PTFE tube in, maybe with a bit of soapy water for lubrication.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.