1 / 4
Router Air Duct 6 inch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachment for adding a 6 inch duct to a Triton Router for dust collection
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
My router was sitting in the dust box sucking all the dust into the electronics. I want to create a duct that funnels clean air to the router and makes the dust box more efficient. This comes in 2 parts that attach with 12x 8x2mm magnets. There is the collar which cinches onto the body of the router and then the duct which snaps into the collar. I printed with 4 walls for vertical shell because it printed faster than the infill.
Hardware: 2x M4 .7 x 16mm
12x 8x2mm magnets