1 / 3
IBC Tank S60x6 to 3/4" connection, swiveling — zdjęcie 1
1 / 3

IBC Tank S60x6 to 3/4" connection, swiveling

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connect a 3/4" pipe connection to an IBC tank, and point the pipe in any way you want.

Ocena
0 / 5
Polubienia
36
Pobrania
258
Wydruki
0
Wyświetlenia
1652
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Used to connect a 3/4" pipe connection to an S60x6 IBC tank outlet.

The 3/4" connection can rotate independently of the IBC connection, making it easy make things water tight even when the pipe needs to go in a specific direction.

Print those with a lot of walls, I used 8 walls, tops and bottoms. And use PETG or similar so they can survive the outdoors.

Also made gaskets for the two connections. Print in TPU with 100% infill. Set the seams to be “random” to not create a weak point and keep it water tight.

I've only tested this with 2 prints for a few hours, but so far it's fully water tight. The drops on the photos are from rain. :-)

Tagi