Elden Ring - Malenia Fan Art - Hueforge - Filament Painting

This is my second Hueforge project, I found this fan art from Sakimichan. I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in any shape or form!

I'm a huge Elden Ring fan and wanted to have some Art on my walls.

I wanted to have gold and shades of red in it but any color you like is fine.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Elegoo Rapid PLA+
PLA DASFILAMENT Metallic Red
PLA Pro ZIRO Red
PLA Jayo Matte Dark Gray 2.3 Transmission Distance: 3
PLA Bambu Gold
PLA Elegoo Matte Grey
PLA Eryone Matte White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Metallic Red
At layer #9 (0.8mm) swap to Red
At layer #10 (0.88mm) swap to Black
At layer #12 (1.04mm) swap to Dark Gray
At layer #13 (1.12mm) swap to Gold
At layer #14 (1.2mm) swap to Grey
At layer #15 (1.28mm) swap to White for the rest.

If you only have one AMS / 4 Colors ready to go at once, change filaments like this once they're done:
 

metallic red - gold
 

red - grey

black - white
 

Use the .3mf file for exactly these filaments but change to what you've got in the slicer. For any other settings I used my thanks go to @Don Mantis because I used the same settings as for his art except the top and internal infill, there I use aligned rectilinear to get an even pattern all around.

Edit: Added the .stl file for personal slicing. It takes a bit and don't change Z height or you have to manually find the best layers for color change.

Added a black and white version as .3mf