Wyze Cam tube mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the little $20 cameras from Wyze ( https://www.wyzecam.com/ ), but the magnetic mount they come with is…
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 86
- Wydruki
- 3
- Wyświetlenia
- 681
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I love the little $20 cameras from Wyze ( https://www.wyzecam.com/ ), but the magnetic mount they come with is limiting. This design allows you to securely mount a Wyze Cam v2 to a tube. It's designed for a one inch tube, but Fusion 360 source is provided for those who want to mix their own.
You will need to disassemble the the base of the mount. Save the pivot hardware, as you will use that to attach to this mount. You will also need some M3x20mm screws and hex nuts. I used Nylock lock nuts so that they don't come loose.
The Wyze hardware has a tendency to loosen if you adjust the mount a lot, so you may want to use a little purple thread-locker to secure things.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
20%
Filament:
Prusa PLA Silver
Notes:
Material does not have to be PLA; that's just what I had loaded in the printer.
Category: Electronics