Anbernic RG35XX H Reversible Grip Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim fitting case that can be used on both sides - one to grip and one to protect the screen and device.
- Ocena
- 4,778 / 5
- Polubienia
- 85
- Pobrania
- 762
- Wydruki
- 9
- Wyświetlenia
- 5764
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The Anbernic RG35XX H is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective case.
There are two models of this case. This is a slim case. Both can be used as a grip or reversed for protection. I also suggest lining the clips with a 0.5mm adhesive felt pad for worry free slip on and off.
- Standard - A standard grip design
- Ergo - A grip design that has a bit of an ergonomic touch to it
I used PLA+, 0.2mm height, 15% infill, and 2 perimeter. I also tried variable layer lines on the curved areas and they came out great. You may notice the top clip will need a long support going up to it since it is a straight 90 degree bend; I used organic supports for these.
If you feel that the case is too tight to your liking, I suggest scaling in all directions in a tiny amount (100.1 or 100.2, etc).
Check out my profile if you also have a Powkiddy RGB30 & Anbernic RG405M for similar cases. Happy gaming!