1 / 3
Lid spacer for Anycubic Photon Mono X (no screws)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid spacer for Anycubic Photon Mono X witouh screws. Easily adjustable and modificable,
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The frame is to be glued over the edge of the platform with a few drops, so that it is easy to remove if needed, without damaging the printer base.
The frame is slightly larger than the printer, protruding a few millimeters around the perimeter, so that the lid fits inside the tab on the outside.
This is the best way to not take up space from the screws in the tray and to be able to put on and take off the screen protector.
Easily adjustable dimensions and height.