1 / 3
Tyco Rebound 4x4 RC 6.0v NiMH battery holder — zdjęcie 1
1 / 3

Tyco Rebound 4x4 RC 6.0v NiMH battery holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This battery sled replaces the standard spring-loaded "6.0v JET TURBO" NiCD battery (all of which are probably dead at…

Ocena
4 / 5
Polubienia
3
Pobrania
97
Wydruki
1
Wyświetlenia
1765
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

This battery sled replaces the standard spring-loaded "6.0v JET TURBO" NiCD battery (all of which are probably dead at this point) with a 5-cell 6.0v NiMH battery which you can find on Amazon, eBay, etc. Note however:

  • The connector leads outside the battery bay. You could snap off part of the original battery door but I do have a 3D printed replica battery door also available.
  • Because of this, you'll also need to get the connector to mate up with the internal PCB. I actually replaced the original Tyco PCB with a modern 2.4GHz toy's PCB ("OYE HOYE LED RC Stunt Cars for Kids" on Amazon, but other clones will probably be the same), so I was able to route the battery connector through what used to be the hole for the power switch.

    How I Designed This

    Tinkercad source

Category: Toy & Game Accessories

Tagi