1 / 6
3/4" PVC Agility Jump and Magnetic Weaves — zdjęcie 1
1 / 6

3/4" PVC Agility Jump and Magnetic Weaves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

uses 3/4inch Schedule 40 PVC to keep cost down and strength up, magnets to connect weave pairs

Ocena
5 / 5
Polubienia
27
Pobrania
124
Wydruki
1
Wyświetlenia
645
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

Uses 3/4inch Schedule 40 PVC - tight fit so no glue needed

10x3mm magnets for the weave connectors (or just use the Weave Middles to extend)

 

I didn't like the other PVC connectors I've seen so I modeled my own version to be much beefier. 

Flat base works well on foam mats and outside on grass, added extra supports because I've broken previous connectors moving jumps around. PLA has been holding up really well so far despite being out in the elements. 

Added recesses for a pair of 10x3mm magnets in the 3-way Weave Pole connector and the end cap. This lets you make pairs of weave poles (easier storage and transport) which magnetize together, used a pair of magnets in each end so poles stay aligned. 
 

Updated models to include small chamfer making installing PVC easier

Added How To Guides to files

Tagi