Potentiometer/jack nut tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little tool for starting nuts on recessed pots and jacks that face down
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Sometimes you have to start a nut on a pot that's upside-down and recessed into a hole that's too small to use your fingers or even needle nose pliers. The Aux Out pot on a vintage Wurlitzer 200A electric piano is one such example. In the past, I have done it by stacking 5 or 6 nuts in a ½" nut driver to carefully thread on only the topmost nut in the stack. That works great if you can find 5 or 6 extra nuts. This tool eliminates the nut-stacking and allows you to thread one nut onto the barrel. Then you can follow up with a nut driver if you want it tighter. Fits standard ½"nuts. You can scale it to fit other size nuts.
Note that all of the print files are for fully updated MINI+ and Mk4 printers with input shaping firmware. Of course it is a very basic model which you can slice yourself for any printer.