EDC Pry Bar Honeycomb Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple EDC (every day carry) pry bar with a cool honeycomb pattern worked into the design.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple EDC (every day carry) pry bar with a cool honeycomb pattern worked into the design. It can also be used as a safer alternative to a box cutter for opening packages. It can easily be looped onto any set of keys and is small en light enough to take with you anywhere. I hope that you enjoy using and printing this design and it becomes a valuable part of your EDC.
I recommend printing this with a max layer height of 0.2mm to get the strongest but most gradual layer progression on the prying end with a preferred layer height of 0.12mm.
I printed it out of PLA but PETG or ABS or Nylon would probably be better for the application its just what I had and it works fine.
Happy printing!
PS This also makes a great print removal tool for the printer room!