Cross Stitch Scroll Frame Taper Design, Cross Stitch, Embroidery, Needlework, Embroidery hoop, replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design features built-in mechanical tapers on the side bars that naturally redistribute wingnut pressure.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 2401
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Functional Scroll Frame Replacements – Tapered Mechanical Tension
Upgrade your needlework setup with this robust, 3D-printable replacement scroll frame system. Engineered specifically for Cross Stitch, Embroidery, Needlework, Punch Needle, and Needlepoint, this design replaces weak or worn-out wood components with high-utility, mechanically optimized geometry.
🛠 Mechanical Design Features
Built-In Frame Tapers: The flat edges of the side bars feature custom-slanted angles. This geometric constraint redistributes pressure from your wingnuts, completely preventing over-tightening and protecting your printed components from cracking under load.
Effortless Adjustments: The anti-over-tighten tapers make loosening and tightening the wingnuts noticeably easier on your hands, allowing for fast tension tweaks mid-project.
Dual-Taper Dowel Grip: One set of components includes an integrated secondary taper designed explicitly to hug the cut ends of the dowels, wedging them tightly into place for a rock-solid hold.
Included Angle Frame: The package includes a dedicated angle frame engineered so that both dowel tapers sit perfectly at the bottom of both sides once fully assembled.
🧭 Assembly & Setup Guide
Side Bar Orientation: Identify the built-in flat-edge tapers. Position one side bar with its taper facing up, and the opposite side bar with its taper facing down.
Angle Frame Alignment: Orient the included angle frame so that the dowel tapers sit firmly at the bottom on both left and right sides.
Mount & Secure: Slide your dowels into place, wrap your fabric, and tighten your wingnuts until snug. The taper geometry will naturally stop the nut before it can pinch or stress the plastic.
🖨 Recommended Print Settings
Material: PETG or ABS/ASA recommended for superior tensile strength and durability under high tension (PLA+ works but may creep/deform over time under constant fabric stress).
Infill: 35% – 50% Gyroid or Grid for strong structural rigidity.
Walls/Perimeters: 2 to 5 perimeters to ensure the wingnut holes and tapered edges do not split.
Orientation: Print flat on the bed for optimal layer line orientation and maximum structural strength.