1 / 3
Mitotoyo Caliper Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Modeled case for a Mitutoyo CD-15CR 500-158. Split to fit normal sized printers. With some creative bow ties to attach the pieces together. I recommend to add some super glue.
Uses 8x3mm magnets to keep the top in place. 8 of them. the holes are 4mm deep and is designed for the magnet to go in first and a circle cover on top. Might be hard to open it with all magnets flush. There is a little spare battery compartment with a cover that's held in place with two 4x2mm magnets.
Added a solid model for large printers without using bow-ties