VKB Gladiator NXT base side covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
covers for the sides of the Gladiator NXT base which help reduce its footprint
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These covers fit in where additional GNX modules would connect to the gladiator base. They remove any unwanted material to make the base slimmer and more suitable for a center mount. They may also fit other GNX modules, but I cannot verify this.
There's no additional hardware required as they click in place and get fixed by the baseplate.
The recommended printing orientation is lying flat on the bed with the inner side facing down. Note that I only provide one file so you will have to mirror one cover in your slicer.