1 / 2
Anti-theft bike light handlebar mount and rear light mount — zdjęcie 1
1 / 2

Anti-theft bike light handlebar mount and rear light mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Smart and safe , anti-theft mount for MBX-2425 light set . Lights after charging are at the same angle.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
238
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Parts

Hardware

Print Settings

  • Filament: PETG 
  • Supports: NO supports required
  • Layer height: 0.15mm 
  • Perimeters: 14
  • Infill: default ( infill will be 100% due to perimeters)

Assembly/Installation

See photos for reference.

  1. remove existing rubber strap mount from light.  
  2. insert  M4  hexnut into socket under the lock guider. 
  3. install M4 20mm through hole in the lock to the socket 
  4. insert M4 hexnut into socket at the top and bottom of the klips
  5. install Ring on handlebar 
  6. insert headlight/taillight into the socket and lock