Work Meister S1 AE52 Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Work Meister S1 3 piece design -> Old-school cool
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 471
- Wydruki
- 1
- Wyświetlenia
- 1922
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this JDM classic. The rims should be as close as possible to the original but still look good 3D-printed.
The Meister S1 are a 3 piece design. You can mount the rim as a sandwich mount or rear load exposed version. I have added lug nuts for a little more JDM spice.
You will need the following bolts for mounting:
DIN 912 M2 x 12 - 36 pieces
DIN 934 M2 nuts - 36 pieces
DIN 912 M3 x 8 - 5 pieces for the lug nuts
DIN 912 M3 x 6 - pieces for the hubcab
I carefully cut the thread into the lugnuts and the hubcab.
If you live in Germany, I can recommend the store schraube-mutter.de for the screws. You should also have at least a 4mm socket wrench. (mine is from WERA)
By the way this is my first design so if you have any suggestions for improvement let me know in the comments. Also show me your color combinations in the Makes.
Happy printing