1 / 4
The Schmidty-Twister -  Curly Tail Grub Mold — zdjęcie 1
1 / 4

The Schmidty-Twister - Curly Tail Grub Mold

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Injection mold for 3" (+/-) twister tail soft plastic lure.

Ocena
0 / 5
Polubienia
25
Pobrania
261
Wydruki
0
Wyświetlenia
842
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

3" twister tail grub mold - affectionately called “The Schmidty Twister”. I printed with 2 walls and 50% infill. Mold has held up through several rounds of injections without warping. Of course, adequate clamping is required to insure a tight seal between mold halves. 

Tagi