Anycubic Kobra 2 Fan Shroud (no supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled a fan shroud purely because I wanted a black and gold printer.
- Ocena
- 5 / 5
- Polubienia
- 115
- Pobrania
- 774
- Wydruki
- 4
- Wyświetlenia
- 3453
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I just wanted a black and gold printer so I made some new printed parts. I also hate supports so I designed it to print without supports. If you want the corner braces in the photo then I have a separate page for that.
I can't remember the exact settings I used because I made this a while ago but I think it was along the lines of:
layer height: 0.2mm
walls: 2
wall order: inside to outside
infill type: cubic
infill density: 15%
top/bottom thickness: 1mm
make sure your retraction and flow settings are tuned so the screws for the fan shroud fit well.