Inflation bag adapter for packraft boston valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An inflation bag adapter that fits over certain boston valves for inflatable watercrafts.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I forked this design from the Top-up nozzle adapter shared by GabC, it allows to turn any airtight-bag into an inflation bag compatible with the boston valves sold by DIY packraft.
Simply cut a 20mm hole into the bag (with reinforcement if needed):
As mentioned by the original author:
Unfortunately not all valve manufacturers make their threads exactly the same, so while it is very close to 7/8-14 UNF, it is incompatible. Thread pitch is exactly the same but diameter is off by almost 2mm.
No support needed, print them flat.