Benchy Holder for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small holders that fit two benchies and attaches to one slot on a honeycomb wall.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 231
- Wydruki
- 6
- Wyświetlenia
- 852
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a compact and customizable holder for my growing armada of benchies and couldn't find any designs that I liked.
This tiny holder holds two benchies, one in a recess that fits the hull and one hook that snaps around the chimney. I've made two attachment variants, one that uses the empty insert and one with a plug that goes into empty inserts.
Small caveat, I don't use the plug-variants of HSW stuff, so I'm not entirely sure the dimensions are correct. It was a fairly tight fit between my insert in PETG and the plug in PLA, but I hope that is just because of the different shrinking properties of the material mix.
The holder itself is just 1.5g of filament, but still feels pretty sturdy to me. With the addition of the HSW-fastener, it's around 3g which is still pretty respectable.