1 / 3
(NEW v.2) Purge bucket and nozzle wipe/cleaner for Ender 3 S1 — zdjęcie 1
1 / 3

(NEW v.2) Purge bucket and nozzle wipe/cleaner for Ender 3 S1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Purge bucket and nozzle cleaner for Ender 3 S1

Ocena
5 / 5
Polubienia
62
Pobrania
253
Wydruki
3
Wyświetlenia
2527
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

v.2 Purge bucket and nuzzle cleaner for Ender 3 S1 .

Version 2: more tight fit mount.

To assemble the nozzle cleaner, you will need 2 M3 bolts (8-12mm), two M3 nuts, a flat piece of heat-resistant silicone (up to 2mm thick). Optionally, you may also need a small piece of foil and adhesive (pencil glue works fine).

Compatible with various nozzle lengths. From standard Mk8 to Vulcano (and analogs)

GCODE macro example:

[gcode_macro PARK_PURGE_SLIDE]
variable_wipe_offset: 15
gcode:

{% set x_offset = params.x_offset|default(1)|int %}

G1 X{printer.toolhead.axis_maximum.x - x_offset} F10000

;wipe

G1 X{printer.toolhead.axis_maximum.x - wipe_offset} F10000

G1 X{printer.toolhead.axis_maximum.x - x_offset} F10000

Material: PETG is preferable, but PLA can also be used with glued foil.

Supports: Model optimized for printing, but better to add manual supports as on screenshot.

 

Mount to printer idea from https://www.printables.com/model/405482-nozzle-wiper-holder-x-axis-ender-3-s1

Tagi