1 / 2
Browning Hi Power 9MM Magazine Interior Floor plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For BHP - 9mm Magazine - The piece that goes inside the magazine that locks the outer floor plate in place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
The interior floor plate for Browning Hi Power 9mm magazines
- The original magazines
- not sure if MK1,2,3 or newer models use the same pattern magazines
- Printing
- No supports needed
- Any material really should work. Might want to use PETG/PAHT or some other resistant material versus PLA, but even PLA should be fine since it's inside the magazine.
- 15-25% infill should be fine
- The nipple that sticks through the exterior plate is a little longer than original steel interior floor plate, but works just fine. If you want it shorter you can easily sand it down.