1 / 3
Simagic Haptic Reactor (HPR) holder Sparco sport seat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simagic Haptic Reactor (HPR) for Sparco sporseat holder for belt holes. Need: - 4 M3x5x4 Heat inserts - 4 M3x12mm bolts
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 950
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Simagic Haptic Reactor (HPR) holder for Sparco sport seat for belt holes.
You need:
- 4x M3x5x4 Heat inserts
- 4 M3x12mm bolts
- I put adhesive foam in between Sparco's stock plastic hole cover and the seat in the outer part for eliminate “plastic-fiber” contact which did a lot of ugly noise.
The Inner part should be printed with supports in order to have well finished bolt holes.
