perry the platypus halloween pumpkin add-ons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i wanted a perry the platypus pumpkin last year so i made these
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 833
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
i wanted a perry the platypus pumpkin last year so i made these
fedora was originally made by: The_Dark_Knight | i remixed it for a flat bottom so that i could easily glue it on. V2 has pegs - V3 does not
feet and bill were originally made by: Yung Lysol | i remixed it and just removed the base and added pegs to insert into the pumpkin | i lost the og model i made of the bill but i made another so hopefully the dimensions are ok.
i didn't have enough time to make the tail, but i was going to remix the tail from Yung Lysol 's model
everything is in the correct orientation and only the bill and hat v2 should need supports :)
feet and bill: polyterra matte pla (sunrise orange) - fedora: bambu labs metal pla + polyterra matte pla (brown + charcoal black)
painted my pumpkin teal, drilled small holes for the parts, used a sledgehammer to carefully put the parts in, used super glue for hat and to keep the parts in
it was pretty easy :)
hope you enjoy and have a perry good halloween!