TS101 Soldering Iron adapter for Dremel Workstation 220
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple adapter for the TS101 Soldering Iron to fit it to the Dremel Workstation 220s thread.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
As I couldn't find a model that fit the TS101 (with the appropriate thread feature) to fit it to the Dremel Workstation 220, I had to make my own.
The thread allows it to fit into the same connection as various Dremel tools with the EZ Lock.
The model features two different parts.
Dremel_Thread_Base
Main model that connects to the Dremel Workstation itself.
Hardware needed:
3x M3 Heatset Inserts (1x - if TS101_Backrest is not printed)
1x M3x10
The M3x10 functions as a locking feature to hold the TS101 in place.
TS101_Backrest
A part that gives the back of the TS101 some extra support when tightening down the M3x10 against the TS101.
Not really needed - more of a “what if it distorts the angle when tightening it down".
Hardware needed:
2x M3x30
The M3x30 is to assemble the backrest onto the Dremel_Thread_Base