Dekstop Air Conditioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed up this this desk air conditioner to cool down on hot summer days and to always have an air conditioner with me when traveling and sleeping outside the home.
3 icepacks, 2 fans and a few hours of printing are enough!
If you print this leave a like and post a make :)
HARDWARE NEEDED:
- 2 120MM FANS
- 3 ICEPACK 16.5x9x3.5
- POLYSTYRENE PANELS
- 8 M5x40 BOLT
- 8 M5 NUT
LINK:
- https://bit.ly/3rRuhn3 (ICE PACK)
- https://bit.ly/2VtFDBz (POLYSTYRENE)
- https://www.amazon.it/ARCTIC-F12-Ventilatore-Estremamente-Configurazione/dp/B002KTVFTE/ref=sr_1_7?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=120+MM+ARCTIC&qid=1627951010&sr=8-7 (120MM FAN).
ASSEMBLY
Mount the fan using the M5x40 bolt with a push and pull configuration(Behind fan must push air into the conditioner, front fan must pull fresh air out the conditioner).
Connect the wire to another cable to extend it and use from usb or wall adpter plug (MUST BE 12V! OTHERWISE THE FAN EXPLODE XD)
Cut the polystyrene and put one in the hole of the "CAP", two in the side wall of the "CAGE" and other three into the housing of the icepack and glue it.
Create an hole in the icepack housing Polystyrene in correspondence with the one on the model (3 in total, 1 for each housing)
Put the cap
Put the air conditioner on the water collector
- Enjoy your freshness, and when you don't use it put the icepack into the freezer ;)
POLYSTYRENE DIMENSION
- CAP (170x137,10)
- CAGE (137,10x167)
- ICEPACK HOUSING (40x97,10)