Angled cooling fan mount for the M6 extruder by Haldis3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows reusing the stock cooling fan from an Ender-3 when upgrading to the M6 extruder from Haldis3D.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I bought the M6 extruder from Haldis3D to upgrade an old Ender-3 to direct drive. I had to design some sort of way to mount a 4010 blower fan to it, as the extruder doesn't include any part cooling solution on its own. This solution mounts the fan to the right of the extruder, below the stepper motor, and blows horizontally at a 30 degree angle.
I designed this fan mount to mimic the position of the fan on the Sprite extruder. This allows reusing any existing duct model that are Sprite-compatible. This is the one I use.
It would probably be fine to print this out of PLA, tho I used PETG to be safe.
Prints without support.
* The photo provided is of an older revision. I'll take better pictures later.