Anycubic Mega Zero v1.0 Bed Thumbwheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Mega Zero v1.0 Bed Thumbwheels are a remix - I made these taller with inset M3 nuts specifically for Mega…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Anycubic Mega Zero v1.0 Bed Thumbwheels are a remix - I made these taller with inset M3 nuts specifically for Mega Zero v1.0's with Heated Bed upgrades that larger than the stock bed (via adapters).
I recommend these be printed in ABS+ due to the heat that gets transmitted through the Bolt into the Nut.
Just use a long M3 Bolt to pull the nut down cleanly inside the cavity.
I Printed these in eSun ABS+ with 2 walls, 2 top/bottom layers and 50% cubic infill.
Print Settings
Printer:
Anycubic Mega Zero
Rafts:
No
No
Resolution:
0.2mm
50% Cubic
Filament: eSun ABS+ White
Notes:
I Printed these in eSun ABS+ with 2 walls, 2 top/bottom layers and 50% cubic infill.
Category: 3D Printer Parts