3-Prong Power Outlet Plug Cover (Type B)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WARNING NOTE: This cover is NOT intended to be used as a child safety device; it is purposefully easier to remove...
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 357
- Wydruki
- 2
- Wyświetlenia
- 1071
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
WARNING NOTE: This cover is NOT intended to be used as a child safety device and is purposefully easier to remove than covers made for safety purposes.
This is a blanking plug that fits into and covers the standard 3-prong power outlets found in North America (officially known as Type B and NEMA 5-15), but it is optimized to fit cleanly over "decorator" aka "Decora" style receptacles.
The goals of this cover are to be:
- As aesthetically simple and minimal as possible
- Relatively easy to insert and remove (it's NOT a safety device)
- Cover the entire face of the outlet openings (e.g. to stop drafts)
- Not block e.g. the buttons on GFCI / AFCI receptacles
Printed at 0.2 mm layer height. Infill can be anything reasonable from about 15% to 100% solid. I recommend that "Horizontal Shells / Solid Layers" be set so that the top and bottom are at least 4 solid layers thick.