Car Hanging Hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These hooks fit in most cars by sliding between the upholstry & roof panel. Now you can hang your clothes in your boot!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This handy hook will finaly allow you to hang clothes in your cars boot (mostly for SUV's or 4WD's).
It's a simple but strong design that will slide inbetween your roofs upholstry and roof panel to give you a secure hanging point for your clothes.
As for strength, I bent a metal coat hanger on this without breaking it so it's got plenty to spare for a couple shirts.
I found organic supports removed a little easier.
Print settings:
- PLA +
- 0.1 Layer Height
- 0.28 First Layer Height
- Verticial Shells, Perimteters: 3
- Support: Everywhere, Grid, Soluble
- Support Option 2: On Plate Only, Organic, Soluble
- Infill: 100%
7.04 Grams of Filament
2.36 Meters
Took 40 Minutes to print on my Neptune Pro 4