Eggshell pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used as a planter, for dry/artificial plants, for decoration or as an LED tea light.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 343
- Wydruki
- 2
- Wyświetlenia
- 968
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Eggshell pot
Can be used as a planter, for dry/artificial plants, for decoration or as an LED tea light.
.. or something completely different
Version freely selectable:
top edge: jagged or curvy
Wall thicknesses:
thin - 0.4mm for decoration
solid - 1.6/2.4mm for stable planters, optionally waterproof (see below)
Sizes:
for planters with max. diameter / outside diameter
- 37/60mm
- 55/75mm
- 75/98mm
- 90/118mm
- 110/140mm
No support structure is required for printing.
Print alignment as specified in the print file, no further alignment necessary
The thin-walled version must be placed on the printing plate.
Print setting:
- Line width: 0.4
- Layer height: 0.2
- Wall lines: 6 (2.4mm)
- Bottom layers: 6 (1.2mm)
- Material: PLA, PETG, ....
Waterproof printing:
Printing slowly and hot already results in a relatively waterproof print, which is often sufficient for seasonal items.
Otherwise please use the following settings (not all necessary):
- Increase wall lines and bottom layers until everything is printed solid. (no filling)
- Slightly increase line width (0.42)
- Print slowly
- PETG or ABS are more suitable for waterproof prints than PLA.
- Set the pressure temperature (nozzle) in the upper range of the permissible temperature)
- Reduce layer height slightly (0.15)
- Random Z seam